By using the right coatings to prevent rust and corrosion you can substantially extend the useful life of your assets. In some cases where the integrity of the metal has been compromised, our coatings can actually bond to, and strengthen, rusted or corroded surfaces and prevent further degradation for many years. In addition to protecting metal surfaces, both Rust Armour ® and EpoprimoTM Moisture resistant solvent-free epoxy primer can be applied to concrete, masonry, or wood.
Rust Armour ® – As a three-coats-in-one system, Rust Armour ® acts as a primer, intermediate, and topcoat with a single application which strengthens surfaces to 6780 psi (473 bar) after 21 days. (Almost twice as hard as concrete – 3500 psi by comparison). It can be applied directly over rusted surfaces or existing paint, with no sandblasting required in most cases. This substantially cuts costs and the time required to complete a project.
PanegrafTM – For a smooth, durable finish that can be tinted to any color, PanegrafTM is a waterproof sealant that is highly resistant to graffiti, chemicals, and staining. It also provides exceptional scuff, mark, and impact resistance.
EpoprimoTM – When surfaces are too wet to apply Rust Armour ®, EpoprimoTM can be applied directly to prevent further surface corrosion. It can be used under water and is resistant to chemicals and solvents.
Contact HLS Coatings today to learn more about our high-performance coatings and how we can help you protect your investments against corrosion.
Over time, water damage and heavy use can compromise concrete and steel flooring. Extend the useful life of your floorings and postpone expensive replacement costs using coatings that preserve and strengthen steel, concrete, and other surfaces.
Rust Armour®– As a 1-coat system, Rust Armour® bonds directly to rusted surfaces preventing further corrosion and hardens to 6,870 psi within 21 days. It is a high performance coating for concrete, steel, and other surfaces that are exposed to the harshest environments.
PanegrafTM Polyurethane Anti-Graffiti Topcoat– An excellent choice for a durable finish sealer or topcoat that can be applied to a variety of surfaces including high traffic floors. It is fully waterproof and highly resistant to chemicals, staining, and scuffing. PanegrafTM can be tinted to any color.
Leakage incidents frequently occur in key building components, including roofs, exterior walls, water-using zones (such as bathrooms and kitchens), and basements. To address the leakage issues in these specific areas, we offer a comprehensive range of specialized waterproofing products, each meticulously engineered to meet the unique requirements of different structures and environments.
PuprawaTM Polyurea Spray Waterproof Coating is a green and environmentally friendly coating with strong weather resistance. It has excellent waterproof performance and can withstand the erosion of various water sources such as rainwater and groundwater for a long time, providing reliable waterproof protection for buildings. PuprawaTMalso combines high strength and good flexibility. It can not only withstand certain external impacts and structural deformations, but also maintain the integrity of the coating when there are slight displacements in the base layer, and is not prone to cracks or peeling. It is an excellent choice for preventing seepage and even leakage in buildings.
Waterproofing of the corridor
Wall waterproofing
Waterproofing of the basement
Waterproofing of the bathroom
Waterproofing of the exterior wall
Waterproofing of the open-air balcony
Waterproofing of the elevator shaft in the villa
PusuwaTM Polyurea Super Tough Waterproof Coating offers significant advantages in building waterproofing and anti-leakage. It forms a seamless, dense waterproof membrane after curing, ensuring excellent water resistance. Its ultra-tough nature resists cracking from external impacts and structural movements. The spray-applied coating cures rapidly, reducing construction time. With good weather and chemical resistance, it minimizes long-term maintenance. Additionally, it adheres strongly to various substrates, is environmentally friendly during application, and safe for use in projects requiring high environmental standards, such as drinking water facilities.
Concrete structures, meant to be indestructible fortresses, often suffer from cracks, spalling, and reduced strength due to exposure to sun, rain, acid-base corrosion, and freeze-thaw cycles. Choosing the right coating is the key to preserving the "vitality" of concrete!
Ordinary coatings may seem inexpensive, but they're like "disposable raincoats." They peel off and lose their effectiveness in no time, leaving the concrete vulnerable again. Constant repairs are not only time-consuming but also costly. In contrast, professional concrete protective coatings act as "invisible armor" for buildings. They adhere closely to the concrete surface, forming a dense protective layer that blocks moisture, chemicals, and UV rays. Even in extreme weather or corrosive environments, they safeguard the concrete structure firmly.
Our concrete protective coating utilizes advanced nanotechnology. With strong adhesion and excellent weather resistance, it can penetrate deep into the pores of concrete, enhancing the internal structural stability. Whether it's bridges, highways, factories, warehouses, underground garages, or water conservancy facilities, it provides long-lasting protection, extends the service life of buildings, and reduces maintenance costs. Choose the right coating, make a one-time investment, and enjoy long-term peace of mind, keeping concrete structures as robust as ever!
The EpoprimTM Multi-functional Epoxy Primer is an environmentally friendly green primer, providing excellent anti-corrosion properties. It also demonstrates excellent adhesion to substrates and between coating layers.EpoprimTM — A long term solution that be applied in layers to provide additional protective insulation. EpoprimTM effectively blocks moisture from reaching the coated surface, protecting it from corrosion for years.
Regular concrete maintenance can extend the service life of infrastructure. EpoprimTM has a significant protective effect on the maintenance and repair of concrete, and can effectively prevent building cracking, efflorescence, rebar corrosion, etc. It can be applied to marine platforms, buildings, industries, ships, etc., and is suitable for concrete protection, bridge deck protection, tunnel lining protection, and industrial floor coatings.
The PuprawaTM High-Polyurea Spray Waterproof Coating is widely applied to waterproofing in construction projects. It is insensitive to moisture and temperature, has a high elongation rate, and will not crack or peel off under alternating hot and cold conditions. Its construction performance is stable, and it has good adhesion to the substrate.
When the EpoprimTM multi-functional epoxy primer is used in combination with the PuprawaTM high-molecular polyurethane spray waterproof coating, remarkable effects can be achieved.
Contact HLS Coatings today to learn more about our high-performance coatings and how we can help you protect your investments against corrosion.
The scene of water rescue is fraught with danger. When rescue boats are navigating through the waves, they not only have to withstand the impact of turbulent waters but also be on guard against the scraping of sharp floating objects. As a result, the structure of the boat is highly vulnerable to damage, and its service life is significantly shortened. Meanwhile, rescue vehicles moving through muddy riverbanks and saline-alkali flats have to endure the abrasion of sand and gravel, the erosion of chemical substances, and the continuous wear and tear on the paint and chassis caused by extreme weather. Under such severe challenges, a high-performance protective coating becomes a crucial line of defense for ensuring the reliability of rescue equipment.
The PuvehiTM Polyurea Vehicle Protective Coating is formulated innovatively. It features high hardness and excellent toughness, providing outstanding abrasion resistance and impact resistance. Additionally, it can effectively withstand the erosion of chemical substances such as acids and alkalis. Meanwhile, its superior weather resistance enables it to endure exposure to sunlight, rain, and other harsh weather conditions. Moreover, its low - surface - energy property ensures excellent stain resistance, and the self - healing microstructure can automatically repair minor damages, thus creating a long - lasting protective barrier.
When PuvehiTM Polyurea Vehicle Protective Coating is applied to rescue boats, it can reduce the hull maintenance cost by more than 70%, significantly increasing the attendance rate of the boats. When used on rescue vehicles, this coating can decrease the component replacement frequency by 60%, ensuring that the vehicles are always in the best condition. Choosing PuvehiTM Polyurea Vehicle Protective Coating means choosing reliable protection verified by data, providing a solid guarantee for water rescue operations and safeguarding the efficiency and safety of every life rescue mission.
In various industrial scenarios and large marine machinery, due to the working environment and equipment operation characteristics, the conditions for the generation of condensation water are often met, resulting in frequent condensation phenomena. In the chemical production industry, the power production industry, and large marine machinery such as the cylinder liner cooling water pipes of ship engines, cranes and anchor machines on deck machinery, as well as the pipes of refrigeration equipment and low-temperature storage tanks on offshore drilling platforms, etc., the surfaces of low-temperature equipment are extremely prone to the formation of condensation water. This not only affects the normal operation of the equipment but may also cause damage to electrical equipment and pose potential safety hazards.Therefore, the selection of coatings is of crucial importance.
Rust Armour® is a metallic-based, moisture-cure polyurethane, encapsulating coating that will coat over and seal virtually any surface against corrosion, weathering, and physical wear. Rust Armour® is also a “three-coats-in-one system” that acts as a primer, intermediate, and topcoat.
Rust Armour® seals out any potential air, moisture, or mineral-based surface attacks that could lead to further corrosion or any type of penetration. It resists abrasion, direct impact, acids, salts, and alkalis without losing its integrity.
PanetopTM Polyurethane Topcoat is a two-component finish formulated with polyurethane emulsion, curing agent, pigments, fillers, additives, and deionized water. It is a health-conscious and safety-certified specialty coating that offers exceptional protective properties, including yellowing resistance, scratch resistance, stain resistance, and easy-clean capabilities.
Wheels Roll, Journey Unfolds; Wear Fades, Peace Pervades
What do truck drivers fear most? After a single trip, the cargo hold is scratched to pieces by steel bars, and the chassis is pitted with holes from flying gravel. Repair bills pile up like a never - ending stream, gobbling up most of the hard - earned income! PMT Polyurea Wear - Resistant Coating is the "life - saving armor" on the road of freight transport! Spray it on the cargo hold, and even when transporting sharp - edged stones, the coating surface remains as pristine as new. Once the chassis is coated, it can brave the most rugged, gravel - strewn mountain roads without a scratch. In the past, trips to the repair shop were a monthly routine. Now, even after three years, the truck looks as good as new! The money saved on repairs is enough to make ten more long - haul trips! With profits doubled and wallets bulging, this is the confidence every freight driver deserves!
The PutruckTM Polyurea Pickup Truck Abrasion-Resistant Coating demonstrates outstanding performance in both physical and chemical protection. It combines high strength with excellent toughness. With its high hardness, it can effectively resist scratches from sharp objects, safeguarding the coating surface when transporting rough building materials and tools. Meanwhile, its high toughness allows it to buffer impacts from road bumps and gravel collisions through elastic deformation, preventing damage to the vehicle paint and metal substrate. In terms of chemical protection, its dense molecular structure acts like a sturdy shield, resisting the penetration of corrosive substances such as acid rain, deicing salts, and industrial exhaust. Whether in the humid, salt-laden air of coastal areas or on roads treated with deicing salts in northern winters, it can prevent metal rusting and vehicle paint aging, comprehensively protecting the vehicle's appearance and metal structure.
This coating also offers significant construction and practical advantages. It cures extremely quickly, reaching usable strength shortly after spraying, which enables the vehicle to be put into use promptly and reduces waiting time. The polyurea coating has a smooth surface, making it difficult for stains to adhere. Simple rinsing or wiping is sufficient for cleaning, greatly reducing maintenance difficulty and time costs. Additionally, the coating has excellent adhesion to the vehicle substrate. Even when facing extreme temperature changes like high heat and severe cold, as well as frequent vibrations, it will not peel or flake off. It can continuously provide abrasion and corrosion resistance, extending the vehicle's service life and saving owners the costs of repairs and replacements.
Hardcore safeguard for gear, High - speed pursuit of peak
In factory workshops, the continuous friction between metal parts and conveyor belts, as well as the fierce impact of ores on crushers in mining operations, are accelerating equipment wear and tear, driving up maintenance costs and downtime. Relying on professionally developed protective technology, the PMT Polyurea Wear-Resistant Coating, with its mature polymer protection system, uses high-hardness materials to resist high-frequency friction and a tough structure to absorb impacts. This fundamentally slows down equipment aging and significantly reduces maintenance frequency, freeing your production line from breakdown troubles. With stable and efficient operation, you can seize market opportunities and empower production with professional protection.
PubraTM Polyurea Abrasion-resistant Coating for Mining is a third-generation polyurea elastomer composed of prepolymer, polyether, amine chain extender, nano-fillers, etc., formed through on-site spray application.The PubraTMPolyurea Abrasion - resistant Coating demonstrates remarkable physical performance advantages in mine abrasion resistance. It combines high hardness with a low coefficient of friction, effectively resisting the scratching and impact of sharp ore particles and reducing the wear caused by the sliding of materials. For example, it can significantly extend the service life of ore conveying pipelines. Its tight and uniform microstructure can disperse stress, preventing the breakage and detachment of molecular chains. Meanwhile, the coating has excellent flexibility, capable of elastically deforming to absorb energy when impacted. With its outstanding adhesion to the substrate, it can jointly resist impacts, reducing equipment downtime for maintenance.
The coating also excels in chemical stability and construction properties. It is resistant to acid and alkali corrosion, and its dense molecular structure can withstand the penetration of chemical media, providing stable protection for equipment in complex chemical environments. Additionally, the PubraTM Polyurea Abrasion - resistant Coating cures rapidly, reaching the required strength shortly after application. With various construction methods such as spraying and brushing, it is adaptable to different types of mining equipment. Thanks to these characteristics, it can greatly extend the service life of equipment, reduce the frequency of replacement and maintenance. Although the initial cost is relatively high, from the perspective of the entire equipment life cycle, it can significantly reduce comprehensive costs, bringing economic benefits to mining enterprises.
Graffiti can damage assets, being both costly and time-consuming. Selecting the right coating is the key to preventing and removing graffiti. Coatings with low surface energy, self-cleaning properties and stable colors can reduce the adhesion of graffiti from the source. Soluble, stain-resistant and chemically resistant coatings can make the removal of graffiti easier and more efficient. From prevention to cleaning, the appropriate coating provides core protection for solving the graffiti problem.
Are you still frustrated by the endless struggle to clean stubborn graffiti with little success? The PanegrafTM Polyurethane Anti - Graffiti Topcoat is equipped with ultra - strong low - surface - energy technology, acting like an invisible "oil - repellent armor" for surfaces. This makes it extremely difficult for graffiti pigments to adhere. Even if defaced, a simple wipe is all it takes to restore the surface to its original cleanliness. Its mirror - smooth surface leaves no room for graffiti strokes, and with a gentle rub, it instantly returns to a pristine state. Moreover, thanks to its excellent chemical resistance, it can withstand powerful cleaning agents without any fear. Repeated cleanings won't damage the coating. Whether it's public facilities, commercial buildings, or private residences, the PanegrafTM can provide robust protection for your spaces. Just one application ensures long - term preservation of the aesthetic appeal of your assets, significantly reducing maintenance costs. It's the perfect choice for anti - graffiti protection!
Copyright © HLS Coatings Co.,Ltd . All rights reserved. 腾云建站仅向商家提供技术服务 网站地图
