Project Description

The bridge had previously been coated with lead-based paint, and the client required encapsulation without any abrasive blasting. The only surface preparation was SSPC SP1 solvent wipe of all surfaces which had oil, grease or other contaminants. Pressure wash at 5,000 psi to remove loose flaking existing coating or rust. Pack rusted areas required SSPC SP 3 power tool cleaning with needle guns. Perforated heavy duty spray tarps were used to catch paint chips and debris.

2 coats of Rust Armour® each coat @ 4 mils DFT

1 coat of Panegraf^TM Polyurethane Anti-Graffiti Topcoat @ 4 mils DFT

Results

Biohazard encapsulation using Rust Armour® & Panegraf^TM Polyurethane Anti-Graffiti Topcoat without costly containment and abrasive blasting.

Products we used

Rust Armour®

Panegraf^TM Polyurethane Anti-Graffiti Topcoat

Our knowledgeable staff is available to answer any questions you may have. Call, text or email us anytime.