PRODUCT DESCRlPTlON

Puprawa^TMHigh-Polyurea Spray Waterproof Coating is made from prepolymer, polyether, amine chain extender, and other raw materials. This technology combines new materials, new equipment, and new processes organically, marking a revolutionary advance in traditional construction techniques.

PROPERTIES

· Solvent - free and environmentally friendly.

· Fast - curing, enabling continuous spraying without sagging.

· Insensitive to moisture and temperature, ensuring stable construction.

· Excellent physical properties and good adhesion to substrates.

· Dense and seamless coating with outstanding waterproof performance.

· High elongation, resistant to cracking and peeling during temperature changes.

· Good weatherability, with no chalking.

APPLICATIONS

Mainly used for waterproofing in water conservancy projects, buildings, tunnels and bridges, stadiums, amusement facilities, underground projects, and power plant cooling towers.

PRODUCT DESCRlPTlON

Puprawa^TM High-Polyurea Spray Waterproof Coating is made from prepolymer, polyether, amine chain extender, and other raw materials. This technology combines new materials, new equipment, and new processes organically, marking a revolutionary advance in traditional construction techniques.

PROPERTIES

· Solvent - free and environmentally friendly.

· Fast - curing, enabling continuous spraying without sagging.

· Insensitive to moisture and temperature, ensuring stable construction.

· Excellent physical properties and good adhesion to substrates.

· Dense and seamless coating with outstanding waterproof performance.

· High elongation, resistant to cracking and peeling during temperature changes.

· Good weatherability, with no chalking.

APPLICATIONS

Mainly used for waterproofing in water conservancy projects, buildings, tunnels and bridges, stadiums, amusement facilities, underground projects, and power plant cooling towers.

KEY PERFORMANCE INDICATORS

★ All the above parameters were tested using a Graco H - XP3 main unit and Fusion AP spray gun under standard conditions. The material was cured for 7 days at 23 ± 2℃ and a relative humidity of 50% ± 5%.

APPLICATION INSTRUCTIONS

· Thoroughly stir Component B until it is completely uniform before construction.

· Mixing Ratio: This product is a two - component package, with A:B = 1:1 (by volume).

· It is recommended to use the high - temperature and high - pressure impact mixing equipment specified by our company during construction.

· Coating Thickness: 1 - 2mm (depending on user requirements).

· Theoretical Coating Rate: 4.5㎡/GAL.

· Coating Interval: The minimum time has no limit, and the maximum should not exceed 3 hours (at 25℃ and 50% humidity).

· Unused Component A should be sealed with nitrogen for storage.

· This system is solvent - free, and it is strictly forbidden to add any diluent.

DRYING TIME

· Surface dry: ≤1min, and it can reach walking strength within 10min (at 25℃ and 50% humidity).

CONSTRUCTION CONDITIONS 

· The substrate temperature during construction should be at least 3℃ higher than the dew point, and the environmental humidity should be ≤90%RH.

· When constructing in a confined space, ensure good ventilation.

PACKAGING SPECIFICATIONS

Component A: 51.897GAL/DRUM; 

Component B: 53.348GAL/DRUM. 

Customized packaging is also available according to user requirements.

STORAGE 

Store in cool, dry, ventilated indoor areas at 5℃-30℃. Shelf life: 12 months.

SAFETY PRECAUTIONS

·It is strictly forbidden to have any open flames in the batching and construction site, and good ventilation should be maintained. Construction personnel must wear protective gear to avoid skin contact. 

·If the paint splashes on the skin, it should be cleaned immediately with an appropriate cleaning agent or soapy water. 

·If it splashes into the eyes, rinse them repeatedly with clean water, keep the eyes open, and seek medical treatment immediately.

DISCLAIMER

· The above information is compiled based on the actual tests and usage experience of our company's technical personnel and can be used as a construction guide. However, due to differences in the painting environment and supporting schemes, it is recommended that users conduct preliminary tests and trials according to their actual needs and purposes before confirming the use. Our company only guarantees the quality and stability of the product itself. When our company's technical personnel are not on the painting site, our company is only responsible for the quality of the coating product itself.

· The protective effect of any coating highly depends on the painting construction. Construction factors such as surface treatment and film thickness will directly affect the service life of the coating. When using this product, users should meet the agreed construction conditions.

KEEP OUT OF REACH OF CHILDREN.