PRODUCT DESCRlPTlON

Panebra^TM Ultra-High Wear-Resistant Aliphatic Polyurethane Coating is a three-component or four-component coating composed of polyurethane resin, wear-resistant fillers, and color pastes. It features high solids content, high wear resistance, non-yellowing, scratch resistance, and chemical resistance.

PROPERTIES

· High solid content

· Excellent anti-slip, wear resistance, and scratch resistance

· Outstanding impact resistance

· Superior weatherability with gloss/color retention and non-yellowing

· Excellent chemical resistance

APPLICATIONS

Suitable for heavy traffic areas requiring high wear resistance and various substrates, with excellent compatibility with epoxy and polyurethane systems.

PRODUCT DESCRlPTlON

Panebra^TM Ultra-High Wear-Resistant Aliphatic Polyurethane Coating is a three-component or four-component coating composed of polyurethane resin, wear-resistant fillers, and color pastes. It features high solids content, high wear resistance, non-yellowing, scratch resistance, and chemical resistance.

PROPERTIES

· High solid content

· Excellent anti-slip, wear resistance, and scratch resistance

· Outstanding impact resistance

· Superior weatherability with gloss/color retention and non-yell

· Excellent chemical resistance

APPLICATIONS

Suitable for heavy traffic areas requiring high wear resistance and various substrates, with excellent compatibility with epoxy and polyurethane systems.

KEY PERFORMANCE INDICATORS

· Gloss: Semi-gloss

· Colored: A:B:C = 5:1:2(weight ratio)

· Specific Gravity: ~1.4kg/L

APPLICATION CONDITIONS

Usage Requirement: Mix and Stir Thoroughly According to the Ratio

MIXING STEPS

·Pour the entire Component A into a clean bucket suitable for stirring an appropriate amount of material. Then, add Component C and stir until well - mixed.
·Add Component B and stir for 1 to 5 minutes until homogeneous.
·Add Component D and stir until the material is uniform and free of lumps.
·Avoid mixing excessive amounts of material. Make sure that the material is within its pot life under the on - site temperature conditions during construction.
·To achieve complete homogeneity, transfer the mixed material to another container and stir again.
·Prevent over - mixing to reduce the incorporation.

Diluent: Add up to 5% diluent for roller application.

Theoretical Coverage: 25.6㎡/GAL

This data represents theoretical coverage and does not account for additional material consumption caused by porous surfaces, surface profiles, leveling deviations, or waste in real-world applications. Additionally, insufficient material application may leave roller marks, non-uniform gloss, or irregular surface textures, while excessive application can result in slower curing.

APPLICATION METHODS AND TOOLS

·Application Methods: Roller coating, air spraying.

·Tools: Roller, spray gun, air pump.

CONSTRUCTION PRECAUTIONS

·Confirm Temperature, Humidity, and Dew Point: Before construction, check the temperature, humidity, and dew - point temperature.

·Divide the Floor into Areas: Divide the floor into several areas to ensure continuous construction within each area.

·Area Division: Divide the areas as far as possible at expansion joints or doorways. After removing the masking tape, the end of each area should form a straight and clean edge to facilitate construction in adjacent areas.

·Avoid Dripping and Control Film Thickness: When dipping the roller into the material, avoid dripping, as it will cause dripping marks on the paint film. To achieve a good appearance, texture, and color, control the wet - film thickness to around 80μm.

·Complete Construction within the Time Limit: After mixing a batch of materials, complete the construction within 25 minutes.

· Avoid Over - or Under - Application: If the application is too thick, the material may have defects such as bubbles or roller marks. If it is too thin, the color will be lighter.

TOOL CLEANING

·Immediate Cleaning: After use, immediately clean all tools and equipment with a special cleaning agent.

·Mechanical Removal for Hardened Material: For hardened or cured 

RE - COATING

To ensure uniform coating, consistent color, no missed spots, no exposed substrate, no wrinkling, and no lumps, re - coating can be carried out. The re - coating interval at 25°C should be at least 6 hours.

POST-CONSTRUCTION CARE

After the top - coat construction is completed, to maintain the appearance of the floor, immediately remove all overflowing materials and clean the floor regularly.

Drying Schedule

(Wet Film Thickness: 100μm, RH 50±5%):

SURFACE PREPARATION

· Ensure previous coatings are dry, dust-free, and oil-free.

· Roughen old coatings before recoating.

· Concrete/mortar substrates must have ≥20MPa compressive strength and ≤8% moisture content.

APPLICATION CONDITIONS

· Temperature: 0-35℃; RH: 15-80%; Substrate Temp: ≥3℃ above dew point.

· Avoid rain, snow, or strong wind.

· Ensure good ventilation and no open flames.

PACKAGING

· Part A: 4.595GAL/DRUM

· Part B: 1.215GAL/DRUM

· Part C: 1.705GAL/DRUM

STORAGE 

Store in cool, dry, ventilated indoor areas at 5℃-30℃. Shelf life: 12 months.

SAFETY PRECAUTIONS

·It is strictly forbidden to have any open flames in the batching and construction site, and good ventilation should be maintained. Construction personnel must wear protective gear to avoid skin contact. 

·If the paint splashes on the skin, it should be cleaned immediately with an appropriate cleaning agent or soapy water. 

·If it splashes into the eyes, rinse them repeatedly with clean water, keep the eyes open, and seek medical treatment immediately.

DISCLAIMER

· The above information is compiled based on the actual tests and usage experience of our company's technical personnel and can be used as a construction guide. However, due to differences in the painting environment and supporting schemes, it is recommended that users conduct preliminary tests and trials according to their actual needs and purposes before confirming the use. Our company only guarantees the quality and stability of the product itself. When our company's technical personnel are not on the painting site, our company is only responsible for the quality of the coating product itself.

· The protective effect of any coating highly depends on the painting construction. Construction factors such as surface treatment and film thickness will directly affect the service life of the coating. When using this product, users should meet the agreed construction conditions.

KEEP OUT OF REACH OF CHILDREN.